Measurement Page

measure_side_viewWe will need to cut holes in your cover to accomodate the vertical pipes on your tractor. Below are 2 diagrams with measurement instructions.

Please take the measurements and e-mail them back to us. It will be necessary to take 4 measurements for the side view diagram and 4 measurements for the top view diagram.

  1. Diameter of Exhaust Pipe – measurement of diameter
  2. Diameter of Muffler – measurement of diameter at the widest point (if your tractor has straight pipes with no muffler, then indicate the widest part of the exhaust system)
  3. Diameter of Mushroom Cap – measurement of widest part of mushroom cap
  4. Diameter of Air Pipe – measurement of diameter





measure_top_view

  1. From front of radiator knob along top seam of the tank, parallel to the point where the exhaust pipe extends up vertically.
  2. From that point at the top of the tank seam down the side of the tank to the exhaust pipe.
  3. From front of radiator knob along top seam of the tank, parallel to the point where the air pipe extends up vertically.
  4. From that point at the top of the tank seam down the side of the tank to the air pipe.